Studded tires are permitted but only with rubber studs. Studded tires are permitted October 15 to March 15. Studded tires are permitted October 15 to April 15. Studded tires are permitted November 15 to April 30. Studded tires are permitted November 1 to April 30 and if retracted, May 1 to October 31. Studded tires are permitted November 15 to April 15. Studded tires are permitted from October 1 to May 1. Studded tires are permitted, but with rubber studs and only in the following locations and times: September 16 to April 30 north of 60 degrees N October 1 to April 14, south of 60 degrees N. Studded tires are permitted at all times with rubber studs. Informed the customer that he/she has to accept a high number of lost studs and lost pins on his/her own risk due to the extreme forces on the studs and the high abrasive rate of the gravel stones. Continental will not accept stud loosing complaints due to hard driving, low air pressure, etc (misuse – summer usage)ħ- Rolling Direction: Continental recommends to never changing the rolling direction of a used studded tireĨ- Special Service (gravel roads): Continental does not recommend to use studded tires mainly on gravel roads. Irregular wear complaints resulting from usage without studs will never be accepted.ĥ- External studding: Continental recommends not to stud or re-stud used tires, due to risk of serious tires damages resulting from incorrect stud lengths or unrecognized trapped stones or dirt in the stud hole.Ħ- Misuse: The performance of studded tires (stud wear, protrusion, stud loosing, etc) is dependent on the service conditions and air pressure. Avoid fast accelerations, hard braking and restrict speeds to a maximum of 100km/h during the first 500km.ģ- Rotation : Continental recommends rotating studded tires every 7,500 – 10,000 km,(4500 - 6200 miles), or after each winter season, (whichever is first), being careful to keep the same rolling direction in order to provide optimal winter tire performance and longest lifetime.Ĥ- Usage without studs: Continental recommend to use studdable tires only fitted with approved studs. If the recommended stud is 10.5 mm, a longer stud can damage the carcass of the tire over time.e the carcass of the tire over time.ġ- Utilization of non approved studs: Continental will not accept claims (stud loosing, tire damage or other loss) resulting from usage of non approved studs.Ģ- Break in Period: Continental recommends to “break in” new studded tires to set the stud seating. The TSMI stud design can be used in our tires, if the right stud length will be used in our tires if the right stud length will be used.Continental does recommend using multi flange designs compared to single flange designs (TSMI) because of ice performance reasons especially for light weight studs the ice performance is improved.Continental does recommend using light weight studs due to environmental (airborne dust) and road wear reason.Continental does not recommend using TSMI studs, due to weight legislation 1.1g in certain province/country.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |